Installing Stainless Steel Tile Backsplash
Stainless steel tile backsplash – Bringing older kitchens current with today’s trends require stainless steel appliances. They are stylish, clean and modern looking. To complement the stainless steel appliances, it’s easy and affordable to install a backsplash, stainless steel. Because it is easy to clean, it may even be behind the stove & # add; Follow these instructions on how to install a stainless steel tile backsplash give the kitchen a minor makeover.
Turn off the electrical power to the area you will be working. Remove all outlets and switch covers. From one end of the tiles, Kraft paper tape to one end of the wall and roll it out across the rest of the tiles. Press it into place. The utility knife, cut along the upper and lower edges of the paper to abut against the wall. Tape the paper in place.
Remove the paper carefully because it is the template that will be used to cut stainless steel. Use this template to order a pre-cut piece of stainless steel at a steel fabricator or the local home improvement store. Prepare the wall for installation by cleaning it thoroughly. Cover the bench with newspaper to protect it from being damaged by sharp edges stainless steel tile backsplash.
With mastic gun, apply construction adhesive on the back of the stainless steel tile backsplash. Spread it with a trowel, and make sure it is smooth and that there are no bumps of glue. Place the stainless steel sheet in position on the wall. When it is in the correct position, the press-while smoothing out all along the wall.